What is it?
Heart BioAmp Candy is a candy-sized sensor for recording ECG signals easily. It is perfect for students and researchers as it offers reliable and accurate ECG recordings, making heart monitoring accessible and convenient for educational and research purposes.
What is included in the kit?
- Heart BioAmp Candy
- Free* BioAmp Accessories Kit
- *12 Gel Electrodes.
- BioAmp Cable v3
- Heart BioAmp Band
- 3 Jumper Cables
*Note:
- Gel electrodes should only be used once, and discarded afterward – treat them like sterile medical products!
- Heart BioAmp Candy comes with a limited no. of electrodes but you can easily buy more from here.
- Don’t leave the gel residue on the snap electrodes of Heart BioAmp Band for longer than an hour as it may damage them over a period of time.
- Wash the band with liquid soap and rinse it properly. Use it again after it is completely dry.
- BioAmp Accessories Kit is free till the stock lasts.
Features & Specifications:
- Input Voltage: 3.3/5 V
- Fixed Gain: x2157
- Bandpass filter: 0.5-34 Hz
- Compatible Hardware: Any development board with an ADC (Arduino UNO R3/R4, Arduino Nano, Adafruit QtPy, STM32 Blue Pill, BeagleBone Black, Raspberry Pi Pico, to name just a few) or any standalone ADC of your choice.
- BioPotentials: ECG
- No. of channels: 1
- Electrodes: 3 (Positive, Negative, and Reference)
- Dimensions: 3.5 x 1.5 cm
- Open Source: Hardware + Software
Connecting with Arduino and BioAmp Cable:
To get started, you can connect Heart BioAmp Candy with any development board with an ADC (Arduino UNO R3/R4, Arduino Nano, Adafruit QtPy, STM32 Blue Pill, BeagleBone Black, Raspberry Pi Pico etc.) using jumper cables provided in the kit. Now make connections between the sensor and your body using BioAmp Cable as shown below:
CAUTION: Make sure to follow the above diagram while making the connections between your Heart BioAmp Candy & Arduino (or any other ADC of your choice), especially the GND and VCC else it may damage the sensor.
Reviews
There are no reviews yet.